Elder Engineering - Plastics Engineering

Ketron PEEK - CA30

MAIN CHARACTERISTICS

* Very high max. allowable service temperature in air
(250°C continuously going up to 310°C for short periods)
* High mechanical strength, stiffness and hardness, also at elevated temperatures
* Excellent chemical and hydrolysis resistance
* Excellent wear & frictional behaviour
(particulary KETRON PEEK-HPV and PEEK-CA30)
* Very good dimensional stability
* Inherent low flammability and very low levels of smoke evolution during combustion
* Good electrical insulating and dielectric properties
(except for KETRON PEEK-HPV and KETRON PEEK-CA30)
* Excellent resistance against high energy radiation (gamma and X-rays)

KETRON PEEK-CA30 (black)
[PEEK - CF30]

This 30% carbon fibre reinforced grade combines even higher stiffness mechanical strength and creep resistance than KETRON PEEK-GF30 with an optimum wear resistance. Moreover, the carbon fibres provide 3.5 times higher thermal conductivity than virgin PEEK dissipating heat from the bearing surface faster.

Ketron PEEK 1000
Ketron PEEK HPV
Ketron PEEK GF-30
Ketron PEEK